| Min. Order: | 100 Set/Sets |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | L/C, WU, T/T, Paypal |
| Place of Origin: | Zhejiang China(Mainland) |
| Means of Transport: | Ocean,Land,Air |
| Production Capacity: | 5000 Sets Per Month |
| Packing: | Blow Box |
| Delivery Date: | 30 Days | Model No:: | LT6189 |
|---|---|---|---|
| Color: | Red/Blue/Black | Port: | Ningbo/Shanghai |
| Pricing Term: | FOB | Delivery Time: | 30 Days |
| Payment Term: | L/C,T/T,Paypal | Transport: | Sea,Air,Land |
Description:
This precision measuring instrument is designed for resetting the timing position on diesel engines with the following fuel pumps: Bosch, EP/VE Rotory, Kikki, Nippon Denso, Cav Roto Diesel, Top Entry fuel pumps.
Applicable diesel engines:
Alfa Romeo, Audi, BMW, Daihatsu, Fiat, Ford, Isuzu, Iveco, Lancia, Land Rover, Mazda, Mitsubishi, Nissan, Renault, Rover, Vauxhall and VW etc. Gauge Diameter: 1.1/2" (38mm)
Introduction:
Suitable for timing distributor type diesel fuel pumps on engines fitted with Bosch VE Rotary, Kiki, Nippon Denso, CAV Rotodiesel - top entry port.
These systems are mainly found on car and light commercial vehicles. Supplied with dial gauge in storage case.
| 1 | Dial Test Indicator |
| 2 | M8 - M12 Adaptor |
| 3 | DTI Bracket |
| 4 | Adaptor Assembly M10 35mm |
| 5 | Adaptor Assembly M8 35mm |
| 6 | Adaptor Assembly 90mm |
| 7 | Probe |
| 8 | Adaptor 90mm |
| 9 | Adaptor 35mm |
| 10 | M14 Extension |
Safety instructions:
1.WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools. ?
2.Do NoT use tools if damaged. ?
3.Maintain tools in good and clean condition for best and safest performance. ?
4.Ensure that a vehicle which has been jacked up is adequately supported with axle stands. ?
5.Wear approved eye protection. A full range of personal safety equipment is available from your dealer. ?
6.Wear suitable clothing to avoid snagging. Do NoT wear jewellery and tie back long hair. ?
7.Do NoT attempt to start engine or move vehicle whilst in gear with timing devices fitted. ?
8.Always display warning notification on steering wheel when timing engine components. ?
9.Account for all tools, locking bolts, pins and parts being used and do not leave them in or near the engine.
10.IMPORTANT: Always refer to the vehicle manufacturer's service instructions, or a proprietary manual, to establish the current procedure and data.
Packing details:
| QTY(SET) | G.W.(KGS) | N.W.(KGS) | MEAS(CM) |
| 5 | 14 | 13 | 33*31*23.5 |
